Model NO.
Product Description
Q69 type roller through shot blasting machine with H beam and steel structure
The roller through shot blasting machine can work continuously ,and clean oxide skin with all kinds of steel materials by continuous way such as steel plates, steel, steel beams, H type steel, steel tubes and cast steel parts,etc. During the cleaning , feed the steel structure parts or steel into the shot area within shot blasting chamber by the adjustable speed conveying roller, and cause surface oxide layer,rust layer and dirt to exfoliate when its sides are hit and rubbed by strong and dense steel shot from different coordinate directions,Which used to load and unload workpiece on the roller by entry and exit both sides of shot blasting chamber. After Steel shot and rust falling on the steel are blown by blowing system, the separated pure steel shot can recycle for shot blasting.The dust in the shot blasting cleaning gone through exhaust pipe to the dust removal system,and then discharge pure air into the atmosphere.
Blast media transport and cleaning systems
The blast media recycling and cleaning system ensures an even
media transport through the blast machine and maintains an
optimal operating mix. This guarantees excellent, consistent blast
results. Safety devices identify foreign objects and discharge them
from the recycling system. The utilized components, such as augers,
elevators and air wash separators are precisely adapted to your shot
blast equipment.
Dust collector
Our air filtering systems, placed on top of the shot blast machines
and equipped with dry cartridge or explosion protected cartridge
dust collectors or wet collectors, are available in different sizes. The
dry cartridge collectors achieve a residual dust content in the clean
air of <1mg/Nm3, considerably lower that the 3 - 5 mg/Nm3 required
by the standards in Germany. Air flow capacities range from 1,000
bis 25,000 m3/h.
Upon request our dry dust collectors can be equipped with a rotary
air lock that allows continuous dust discharge into a big bag.
Dropout box
Placed in the exhaust air duct, the dropout box catches and
discharges undersized media from the air flow. The exhaust air,
loaded with dust, enters the dropout box from the side or the top
and hits an impact plate. Coarse, heavier particles cannot follow this
air flow diversion and fall to the bottom.
Noise absorbing cabin
Depending on the machine type and the number of turbines,
the noise level around a shot blast machine can reach over 80
dB(A). The noise absorbing cabins consist of high-quality dual-
wall segments with a lining on the inside. Their individual design
ensures that the specified max. noise level is not exceeded. To save
costs Rösler noise absorbing cabins are only placed around those
equipment components that require protection against noise.
Power & Free chain transport systems
Die P&F chain transport systems connect several processing
stations with each other (for example, assembly, shot blasting,
painting, quality control and packing). P&F systems are extremely
versatile and can handle a broad range of transport tasks. The work
piece trolleys are pulled through the rail of the transport system
by a closed-loop endless chain. At all critical points and transfer
stations "intelligent" sensors ensure the precise handling of the
arriving trolleys.
or thermal oxidation
Regenerative thermal oxidation units are necessary whenever the
VOC content of the used paint exceeds a limit, and this content
cannot be discharged into the environment without additional
filtering measures. Depending on the composition of solvent-based
paints and their VOC contents, certain clean air limits must be met.
The users must find out the exact limits in their respective countries
and regions. The RTO unit is available as a 2-chamber or 3-chamber
version. During the heat-up phase a gas burner heats multiple
ceramic plates in the combustion chambers to about 800 °C. At this
high temperature the vapors and gases coming from the paint filter
iXXXX and start a chain reaction. Therefore, continuous, energy-
intensive combustion is not necessary.
Product Parameters
Mesh belt through shot blasting machine
The equipment is used for cleaning surface of thin-wall and fragile iron or aluminum alloy castings,ceramics and other small parts,can also be used for mechanical parts shot peening,it has the characteristic good continuity,high cleaning efficiency,small deformation,no pit and son on.it can be used alone,also can match production line.
| Type |
QWD60 |
QWD80 |
QWD100 |
QWD120 |
| Mesh width(mm) |
600 |
800 |
1000 |
1200 |
| Clearing speed(m/min) |
0.5-4 |
0.5-4 |
0.5-4 |
0.5-4 |
| Blasting capactiy(kg/min) |
4*120 |
4*120 |
4*180 |
4*260 |
QG series steel pipe inner and outer wall through type shot blasting machine
The equipment pipe inner and outer wall through type shot blasting machine is for clean the inner and outer walls surface of all steel pipes,it will render great metallic color after removing the oxide layer and welding slag to facilitate painting and coating of workpiece.
| Type |
QGW20-50 |
QGW80-150 |
| Clearing pipe diameter size)(mm) |
30-500 |
250-1500 |
| Abrasive flow rate |
2*260(kg/min) |
2*260/2*750(kg/min) |
| Clearing speed |
0.5-4(m/min) |
0.5-4/1-10(m/min) |
Q69series roller through shot blasting machine
Parameter
Type |
Q6915 |
Q6915A |
Q6920 |
Q6920A |
Q6930A |
Q6930G |
Q6930J |
| Length/mm |
>800 |
>800 |
>900 |
>2500 |
>6000 |
>6000 |
>6000 |
| Steel plate width/mm |
≤1500 |
≤1500 |
≤2000 |
≤2000 |
≤3000 |
≤3000 |
≤3000 |
| Steel plate thickness(mm) |
1.5-20 |
1.5-20 |
3-60 |
3-60 |
5-60 |
5-60 |
5-60 |
| Section steel plate width(mm) |
1200 |
1000 |
1200 |
1200 |
1450 |
1450 |
1000 |
| Section steel plate thickness(mm) |
200 |
200 |
450 |
300 |
500 |
500 |
300 |
| Cleaning speed(m/min) |
1-2 |
3-6 |
1-3 |
1-4 |
0.8-2 |
0.8-2 |
0.8-6 |
| Impeller head quantity |
4 |
6 |
6 |
4 |
6 |
6 |
4 |
| Single abrasive flow rate(kg/min) |
200 |
480 |
480 |
300 |
400 |
300 |
200 |
| Single power/kw |
15 |
37 |
37 |
22 |
30 |
22 |
18.5 |
| Total power/kw |
90.75 |
226.2 |
132 |
314 |
331.2 |
258.88 |
222.44 |
| Overall dimension(mm) |
12947*3673*6225 |
15500*3673*6850 |
16805*4800*7870 |
8200*5800*8840 |
9724*6392*8039 |
9020*6392*7600 |
9020*639*7733 |
Buying leads
1.What is your workpiece and the material and the shape ?
2.Send me the Max.Length/Width/Height of the workpiece and the MAX./MIN.Weight of your workpiece.
3.how many tons/pieces do you need blast the workpiece per day or per month?
4.what is the power supply do you need?
5.what is the wire diameter and production name?(direct at wire rod shot blasting machine)
6.what is the workshop height?in order to install the machine
About equipment
1.Production time: 20-40 days or half years according to different type.
2.the time of installation and debugging: 10-15 days,and intelligent shot blast production line is about 60days
3.Installation and debugging: We will dispatch 1-2 technicians to help with machine installation and debugging, customer pays for their tickets, hotel and diet.
4. Warranty time: 12 months from date of debugging completion, but not exceed18 months from date of delivery.
5. Payment term: 30% as prepayment, balance 70% before delivery or L/C at sight.
6. English documents: including total installation drawing, pit design drawing, instruction book, circuit diagram drawing and notice, etc.
1. Reply your inquiry in 24 working hours.
2. Experienced staffs answer all your questions in time.
3. Customized design is available.
4. can be provided our customers with exclusive and unique solution by our well-trained and professional engineers and staff.
5. Special discount and protection of sales will be provided to our distributor.
6. Professional factory: We are largest manufacturer, specializing in producing all kinds of Shot Blasting Machine & Metal Abrasive and so on in China, competitive with good quality products
7. As an honest and more experience seller, we always use superior raw material, advanced machines, skilled technicians to ensure that our products will be designed in high quality and stable performance.
8.we have more than 30 patents with shot blasting machine(36 patents with wire rod shot blasting machine)
9.we have R&D capability with all kinds of shot blasting equipment.
If the above model is not suitable for your workpiece, please tell us your requirement and then we can send you the most satisfying drawing.
After Sales Service
1.Supplier ensure that the name, model, specification and quantity are consistent with technical agreement ,and we
make sure that all machine is new with qualifying product through perfect technology and installation,the quality is
stable and reliable.There are no defects in design, material and technology,which is available for customer proposal.
And meets the standard of national industry.
2.Arrange for engineer or skilled labour to installation and comissioning of equipment in overseas ( except force majeure, inappropriate operation and the quick-wear parts ).
3.In order to ensure a good quality, every machine in the factory will be strict calibration and commissioning before they
leave the factory.
1.What is your workpiece and the material and the shape ?
2.Send me the Max.Length/Width/Height of the workpiece and the MAX./MIN.Weight of your workpiece.
3.how many tons/pieces do you need blast the workpiece per day or per month?
4.what is the power supply do you need?
5.what is the wire diameter and production name?(direct at wire rod shot blasting machine)
6.what is the workshop height?in order to install the machine
Our machines have exported to France, Spain ,Russia, Mexico , Japan,korean, Pakistan,Vietnam,Thailand,Southeast Asia and other countries , so we are confident with our professional R&D technology and ability ,We sincerely hope that with more reputable customers on the basis of equality and mutual benefit to establish long-term business relations of cooperation
Leader Wang / Jinan Pumingwei Electrical Equipment Co. Ltd
552 Gongye Er Road, Mingshui Street, Zhangqiu District, Jinan, Shandong, China
North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}